Support card: all 125kHz HID proximity card, such as HID Prox II, HID fob card and more
Interface: Weigand
Reader range: 5 to 10cm
Frequency: 122 to 128kHz
Operating temperature:-30 to +60°C
Operating humidity: 5 to 95% RH (relative humidity non-condensing)
Audio/visual indication: green and red and buzzer signal output
Response time: less than 0.2 seconds
Cable length: 250mm
Weight: 60g
Wiring:
Red: power 5 to 16V
Black: power ground
Green: Wiegand output D0
White: Wiegand output D1
Brown: green LED control
Blue: buzzer control
Yellow: hold
LED/buzzer functions:
LED function: the LED color is normally in red
It starts with 2 green flashes on power up HID compatible card reader and remains red
When a HID proximity card is present to the reader
The LED will momentarily flash green, this indicates that the proximity card was read properly by the reader
When the LED control signal is activated by access controller host, the LED changes to green
Beeper function: power up the HID compatible card reader, the beeper will activate 2 times When a HID proximity card is presented to the HID proximity card reader, a short beep will be emitted
This indicates that the HID proximity card was read properly by the reader
Access Control & Anti-intrusion - Looking for more information
about new products, major suppliers, current
issues and future trends? Learn how the Global
Sources China Sourcing Report: Access Control & Anti-intrusion
will provide you with critical insights for
greater sourcing success in China.
Contact Details
Shenzhen YSE Electronics Co.,Ltd
613 Room 6F, Nanfen Building
Longjing Town, Taoyuan Street
Nanshan District Shenzhen Guangdong China 518000
Tel:
(86 755) 33084232
Fax:
(86 755) 61640811
Mobile:
(86) 13143463985
