Power requirements: 9 to 15V DC at 150mAh, a linear regulator is recommended
Interface: Wiegand34 for misfire and Wiegand for HID
Reader range: misfire 4 to 10cm
HID 5 to 10cm
Frequency: 125kHz/13.56MHz
Operating temperatures: -30 to 60°C
Operating humidity: 5 to 95% RH relative humidity non-condensing
Audio/visual indication: green/red and buzzer signal output
Dimensions (W x H x D): 76 x 123 x 23mm
Cable length: 250mm
Weight: 200g
Mifare + HID combination card reader:
Mifare smart IC card and HID proximity card combination proximity card reader
It reads all HID or HID compatible proximity card identification number and reads customized sector data inside misfire card, it is high secure system as the protection code of misfire smart card sector is under customer control
The reader is with Wiegand34 interface for misfire and Wiegand interface for HID's to interface with access controller, it is a good solution to update access control system with normal HID 125kHz card to 13.56MHz smart misfire card technology, with this design, the existing HID card and database can be used smoothly and new released card can be become into smart misfire cards
